Congratulations on your wallet!
Please read the following instructions before using the wallet.

Important note
The slider on the side is a little stiff in the beginning because it has to adjust itself to the number of cards first.

How the wallet works
The wallet is made of aluminium and designed to keep your most important cards safely together. You have all your cards at hand at the same time and the cards are protected from bending, breaking and deformation. The wallet also protects you from RFID readers (Radio Frequency Identification). Thus, the data of your credit cards, bank cards, chip cards, identity cards and other cards is protected.

How to use the wallet
The wallet holds 4 to 6 cards (6 cards if one card has debossed letters; 5 cards if three cards have debossed letters; 4 cards if all cards have debossed letters). For optimal use, you should place the most frequently used cards in the back. Gradually slide the cards outwards with a hand movement over the black slider. To reach one of your cards in the middle area, push the cards in front of it back into the aluminium case. After use, push all the cards back into the aluminium case manually with little force. Clean the aluminium case with a soft cloth and warm water and let it dry before using it again. The manufacturer accepts no liability or responsibility for damage to the mechanical components or the cards used as a result of incorrect operation. 

Attention 
If the black slider does not return in its initial position, you can do the following:

- Change the order of the cards.

- Shake it, blow into it, or clean it with warm water to remove dirt. 

The wallet was developed for a standard credit card size. Smaller cards may fall out. Similarly, larger cards may damage the mechanism or cause other cards to come loose or fall out. The wallet only provides limited protection from strong magnets and is not suitable for business cards made of cardboard.